A community for authoring Blu-ray, 4K/UHD and more!
I'm working on my first BD project, and wondered if anybody can help.
I have a main feature with dual English and French audio tracks, and subtitles On/Off options.
My question - How do I set the Main Menu "Play" buttun up? If a user then goes in and changes the audio to French and subtitles to "on" and then goes back to the main "Play" button it will re-set the audio and video back to the settings I have there (which is English audio).
Is there an easy way around this?
I was referring to the GPRMs I've set up (I don't see how they tie-in with the main play button). See the sample project link above. :)
Is there a video tutorial online anywhere for setting this up?
It all starts at the Button action setting level. Look at the Setup Menu MB and the Setup Audio 3 button (enter key) for example. There are two Set actions that happen when this button option is selected. One of them is setting a APRM value in the player register for the audio stream. It is tracked and used by other if/else conditions through other possibilities like when the Feature Play list is played and the if/else conditions are read at the start. Look under the Start option of the Playlist - Feature Movie.
You should reach out to Steve Kirkham if you need further assistance, as he offered.
Good luck, Rob
I guess my project is a little different to the sample project. Here's what I have:
Main Feature 1 (French on-screen credits)
Audio 1 = English
Audio 2 = French
Subtitle 1 = English (defaults to ON for English audio track, translates French credits)
Subtitle 2 - English (optional, for French audio track)
Main Feature 2
Audio 1 = Spanish
Subtitle 1 = English (optional)
I need some help working out how to get this all set up properly. Anyone who can help, I'd most appreciate hearing from you.